Custom Load Cell Solutions for OEM Equipment
Adapt capacity, dimensions, mounting, cable, connector and signal output to your machine. We support equipment manufacturers from application review and prototype evaluation through repeat production.
Start an OEM Load Cell ProjectDesigned Around Your Equipment
When a standard model cannot meet the available space, load path or electrical interface, selected specifications can be adapted using drawings and verified operating requirements.
Mechanical
Capacity, external dimensions, threads, mounting holes, load buttons, flanges and installation interfaces.
Electrical
Rated output, cable type and length, connector, wiring, amplified signal and digital interface.
Environmental
Material, sealing, corrosion protection, temperature considerations and cable-entry protection.
Performance
Accuracy, repeatability, creep, overload, stiffness and dynamic-response targets.
Identification
Model naming, labels, serial numbers, packaging and documentation requirements.
System Integration
Matching amplifiers, transmitters, indicators, junction boxes and controllers.
From Requirement to Repeat Production
Confirm load cases, dimensions, performance, environment and annual demand.
Agree drawings, specifications, output, cable and acceptance criteria.
Evaluate samples in the intended fixture and real operating conditions.
Finalize inspection, documentation, packaging and repeat-order control.
Information Needed for an OEM Review
| Parameter | Details to Provide |
|---|---|
| Application | Machine function, measured force, operating sequence and reason for customization |
| Load Case | Direction, normal load, peak load, overload, side load and dynamic frequency |
| Mechanical | Drawings, available space, mounting interfaces, materials and allowable deflection |
| Performance | Accuracy, repeatability, resolution, creep, bandwidth and temperature range |
| Electrical | Output, excitation, cable, connector, amplifier and control-system interface |
| Environment | Moisture, corrosion, washdown, vibration, temperature and special conditions |
| Commercial | Prototype quantity, expected annual volume, delivery target and destination |
Custom OEM Load Cell FAQ
What can be customized on a load cell?
Depending on feasibility, capacity, dimensions, mounting, material, cable, connector, output and environmental protection can be adapted.
Do you need a drawing?
A machine or installation drawing greatly improves evaluation. Load direction, mounting surfaces and available space should be clearly identified.
Can an existing sensor be replaced?
Yes. Send the model, nameplate, dimensions, wiring, output, installation photos and operating conditions for a compatibility review.
Is prototype testing necessary?
Prototype validation is recommended because fixture stiffness, alignment, temperature and real load conditions influence system performance.
Can electronics be supplied with the sensor?
Suitable amplifiers, transmitters, indicators, junction boxes or controllers can be considered as part of the measurement chain.
What information is required for a quotation?
Send drawings, force range, dimensions, performance target, environment, output, cable, connector, prototype quantity and expected volume.
Need a Load Cell Built Around Your Machine?
Send your drawing and load requirements for an engineering review.